Sherco Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #4 ·
You need to check the voltage it is putting in to the battery, if it is too much you will cook the battery, you will need to replace the V regulator if this is happening !
I have a new problem now,with the fan.The fan is good(i changed two Comex in 2 years and now i have a Spal-this is good)and now doesn't work because the cable is broken.i changed with a new cable with relay and new temperature sensor but still doesn't work.what is the problem?
 

·
Registered
Sherco SEF-R 250 4T
Joined
·
4 Posts
I really suffered a lot with Sherco fans. A tip, take the harness to an electronics professional and ask him to open the relay connector. Mine was completely oxidized and didn't allow the current to pass to the relay to activate the fan.
 
1 - 6 of 6 Posts
Top