Sherco Forum banner

2016 Se r Charging issues

1481 Views 3 Replies 3 Participants Last post by  radumorar92
Hey guys, Gutting to see the old form is gone that is heart breaking. Is there any links to any of the info ? guess not .

I have a issue with my charging system i cant work out. I am only getting 12.4 V at the battery while running, i have checked the stator resistance and get a some what stable .3 - 4 Ω and there is no shorting to ground. i have also done a Diode test on the Regulator and that also seems fine no leakage and a solid .5 V in the open direction.
I can't find any broken wires or loose connections. It seems like that is the whole system ??? anyone got any feed back ?
1 - 4 of 4 Posts
Hi,I have one problem with my Sherco sef 300 2017...when I ride my regulator is to hot.what happens or what is the problem?
Hey guys, Gutting to see the old form is gone that is heart breaking. Is there any links to any of the info ? guess not .

I have a issue with my charging system i cant work out. I am only getting 12.4 V at the battery while running, i have checked the stator resistance and get a some what stable .3 - 4 Ω and there is no shorting to ground. i have also done a Diode test on the Regulator and that also seems fine no leakage and a solid .5 V in the open direction.
I can't find any broken wires or loose connections. It seems like that is the whole system ??? anyone got any feed back ?
I'd be thinking you should get about 13.4 Volts @ battery, my V regulator was cooked @ 123hrs which seems to be about the time they die if they are going to die, :( Just wondering how many hrs you have done ?
I have 350H with this bike.I buy a new regulator because the old is bad(the triristor TYN 616 is fire).When I found this Tiristor I make this old regulator but now I have a new model regulator.Thanks for info Briansmale1953
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top